Linconn Electronic Technology Co.,Ltd
Product Catalog
Contact US
Address: 8/F, Bldg. 5A06, Shabian Haibin Industrial Zone, Baoyuan Road, Xixiang Street, Baoan Dist, Shenzhen, 518126, China
TEL: +86-755-33512731
FAX : +86-755-33513406
Home > News > Content
Coax Connector Structure Classification
- Oct 19, 2017 -

Coaxial cable can be divided into two basic types, baseband coaxial cable and broadband coaxial cable. The current baseband commonly used cable, the shield line is made of copper mesh, the characteristic impedance of 50 (such as RG-8, RG-58, etc.); broadband coaxial cable commonly used cable shielding is usually aluminum stamping Into the characteristic impedance of 75 (such as RG-59, etc.).Coax Connector

Coaxial cable and coaxial cable refers to the coaxial cable diameter is small or small. The coarse cable is suitable for relatively large local networks, and its standard distance is long and the reliability is high. As the installation does not need to cut off the cable, so you can flexibly adjust the computer's network location as needed. But the cable network must be installed transceiver and transceiver cable, the installation is difficult, so the overall cost is high.Coax Connector On the contrary, the cable installation is relatively simple, low cost, but because the installation process to cut off the cable, both ends must be fitted with the basic network connector (BNC), and then connected to the T-connector at both ends, so when the connector for a long time prone to poor contact Of the hidden dangers, which is currently running one of the most common failures occurred in Ethernet.Coax Connector

Whether it is a thick cable or a thin cable are bus topology, that is, a cable connected to multiple machines, this topology for machine-intensive environment. However, when a contact fails, the fault will affect all the machines on the entire cable, fault diagnosis and repair are very troublesome, therefore, will be gradually replaced by unshielded twisted pair or cable. The electrical connector allows the current to be blocked in the circuit or isolate the different circuits to communicate, enabling the intended function of the circuit. Electrical connectors are widely used in industrial, electronics, power, machinery, chemical and other fields have a certain application.Coax Connector